How to Connect an RFID Reader to a Computer

You can connect an RFID čitač to a computer using USB, RS-232, RS-485, Ethernet, Bluetooth, or Wi-Fi, depending on the reader model. Some USB readers work immediately after being plugged in, while others require drivers, communication settings, or dedicated RFID software.

The connection procedure also depends on how the reader transfers data. For example, a USB RFID čitač with keyboard emulation can enter tag IDs directly into Excel, while a fixed UHF reader may use TCP/IP to send tag data to an inventory management system.

This guide explains how to connect different types of RFID readers to Windows computers, configure their communication settings, and test whether tag data is being received correctly.

What Do You Need to Connect an RFID Reader to a Computer?

Before connecting your reader, check its communication interface and power requirements. These are normally listed on the product label, datasheet, or user manual.

You will need:

  • A compatible connection: A USB cable, RS-232 or RS-485 adapter, Ethernet cable, or supported wireless connection.
  • Power for the reader: Many desktop USB readers draw power directly from the computer. Industrial and fixed readers often require a separate DC power supply or supported Power over Ethernet (PoE).
  • Drivers or RFID software: Some readers work as plug-and-play USB devices, while others require manufacturer software, a serial terminal, or an application that supports the reader’s communication protocol.

Different RFID readers may offer several interfaces. For example, our UHF RFID čitač s 4 priključka supports Ethernet, RS-232, RS-485, Wi-Fi, and Bluetooth, allowing it to connect to different host systems.

The physical interface tells you how to establish the connection. The reader’s communication mode determines how your computer receives and processes the RFID data.

How to Connect a USB RFID Reader to a Computer

blank

USB is one of the most common interfaces for desktop RFID readers. It is used in card identification, employee check-in, livestock identification, and NFC tag applications.

However, USB RFID readers do not all communicate in the same way. The three common modes are USB HID, Virtual COM Port, and PC/SC.

Connecting a USB HID RFID Reader

USB HID keyboard or keyboard-wedge readers emulate a keyboard and enter configured tag data into the active input field. However, not every USB HID reader operates as a keyboard; some use vendor-specific HID reports that require compatible software or an SDK. The operating system recognizes the reader as a keyboard-like input device, so no dedicated RFID application is needed for basic tag ID entry.

Follow these steps:

  1. Connect the RFID reader to an available USB port on your computer.
  2. Allow Windows to recognize the USB device.
  3. Open Notepad, Microsoft Excel, or another application with a text input field.
  4. Click where you want the RFID data to appear.
  5. Place a compatible RFID card or tag within the reader’s scanning range.
  6. The reader sends the tag ID to the active input field.

Na primjer, naš 125 kHz and 13.56 MHz Dual-Frequency RFID Reader supports USB-HID keyboard emulation and driver-free operation.

If the reader is configured to append an Enter or Tab character after each scan, Excel can automatically move to the next cell. This is convenient for recording card numbers or creating simple RFID identification lists.

USB HID readers are particularly straightforward for applications that only need to collect tag IDs.

Connecting a USB Virtual COM Port RFID Reader

Some USB RFID readers communicate through serial port emulation. When connected, the computer creates a virtual COM port that software can use to exchange data with the reader.

The procedure on Windows is:

  1. Connect the reader to your computer using USB.
  2. Install the appropriate USB serial driver if Windows does not recognize the device automatically.
  3. Right-click the Windows Start button and select Device Manager.
  4. Expand Ports (COM & LPT) and locate the RFID reader’s virtual serial port, such as COM3 or COM5.
  5. Open the manufacturer’s RFID software or a compatible serial terminal.
  6. Select the assigned COM port and configure the required communication settings.
  7. Start reading or send the appropriate command, depending on the reader’s operating mode.

The baud rate, data bits, parity, and stop bits must match the reader’s configuration. A common serial configuration is 9600 baud, 8 data bits, no parity, and 1 stop bit (8N1), but the correct settings depend on the model.

Na primjer, naš 134.2 kHz Desktop LF RFID Reader supports USB with serial port emulation and keyboard emulation. It also provides an SDK for software integration.

If no COM port appears in Device Manager, check whether the reader is configured for serial emulation or another USB mode before installing additional drivers.

Connecting a USB PC/SC RFID Reader

PC/SC is commonly used with HF RFID and NFC smart card readers. It provides a standardized software interface for applications to communicate with contactless smart cards.

Unlike a USB HID reader, a PC/SC reader does not automatically type scanned card numbers into Notepad.

To connect one:

  1. Plug the PC/SC reader into your computer’s USB port.
  2. Install the appropriate driver if it is not already available.
  3. Open Windows Device Manager and check whether the reader appears under Smart card readers.
  4. Install or open an NFC or smart card application that supports PC/SC.
  5. Select the reader in the application and present a compatible card or tag.
  6. Use the application’s read function to retrieve supported card information.

PC/SC applications communicate with the reader through commands. Depending on the card and application, they can retrieve identifiers, read data, or perform authentication operations.

This connection method is common for NFC development, smart card testing, and contactless identification applications.

How to Connect an RFID Reader via RS-232 or RS-485

RS-232 and RS-485 are serial communication interfaces often found on industrial RFID readers. They are used in production equipment, access-control systems, automated identification stations, and other installations requiring wired communication.

Both interfaces can connect to a computer, but they use different electrical signaling and wiring arrangements.

Connecting an RS-232 RFID Reader

RS-232 typically provides a point-to-point serial connection between the reader and a computer.

To establish the connection:

  1. Connect the RFID reader’s RS-232 interface to the computer’s serial port using the appropriate cable. If your computer has no serial port, use a USB-to-RS-232 adapter.
  2. Connect the reader to its required power supply.
  3. Open Windows Device Manager and identify the serial COM port.
  4. Launch the reader’s software or a compatible serial terminal.
  5. Select the COM port and enter the reader’s baud rate, data bits, parity, and stop bits.
  6. Start the reader’s scanning function or send its supported reading command.

Na primjer, naš UHF RFID čitač s 4 priključka supports RS-232 baud rates of 9600, 19200, and 115200 bps, with 115200 bps listed as the default. The correct settings should be taken from the specifications of the connected model.

If the reader communicates through a proprietary command protocol, use its supplied software or command documentation. A serial terminal alone will not automatically interpret every RFID reader’s data format.

Also check the connector pinout. RS-232 connectors may look similar across devices without using identical wiring.

Connecting an RS-485 RFID Reader

RS-485 uses differential signaling and supports longer communication cables and multiple devices on the same bus.

Most computers do not have a built-in RS-485 interface, so a USB-to-RS-485 adapter is commonly used.

Connection steps:

  1. Connect the reader’s RS-485 terminals to the corresponding terminals on the USB-to-RS-485 adapter.
  2. Follow the reader and adapter wiring diagrams to match the A/B or Data+/Data− connections correctly.
  3. Connect the USB adapter to the computer and install its driver if needed.
  4. Find the assigned COM port in Windows Device Manager.
  5. Open compatible software and configure the serial communication parameters.
  6. Set the reader’s device address if the communication protocol requires one, then test communication.

For longer RS-485 bus installations, appropriate termination and biasing may also be required. These should follow the reader’s wiring documentation.

Our industrial UHF readers offer RS-485 interfaces for integration with equipment and control systems. RS-485 is especially useful when several devices need to communicate over a shared wired network.

How to Connect an RFID Reader via Ethernet

Ethernet is commonly used with fixed UHF RFID readers in warehouses, logistics facilities, production lines, and vehicle identification systems.

A network reader communicates with the computer using its IP address and a supported software protocol.

To connect an Ethernet RFID reader:

  1. Connect the Ethernet cable. Plug the reader into a network switch or router. A direct connection to a computer is also possible if the reader supports the required network configuration.
  2. Power on the reader. Connect its specified DC supply or supported PoE source, depending on the model.
  3. Find the reader’s IP address. Use the manufacturer’s discovery utility, network configuration tool, or router’s DHCP client list. Some readers also have a documented factory-default IP address.
  4. Check the network settings. Make sure the reader and computer have compatible IP and subnet configurations and can communicate over the network.
  5. Open the RFID software. Enter the reader’s IP address and the required communication port or select it through the software’s discovery function.
  6. Establish the connection. Start the tag inventory or reading function to verify communication.

Na primjer, naš 7 dBi Integrated UHF RFID Reader offers TCP network communication in its E-Type configuration. It also includes test software and SDK support for integration with computer applications.

Some Ethernet RFID readers provide a web-based configuration interface that can be accessed through a browser using the reader’s IP address. Others require dedicated configuration software.

Fixed UHF readers may use TCP-based proprietary commands or Low Level Reader Protocol (LLRP) to communicate with an application. LLRP is a standardized protocol used by compatible UHF RFID readers for inventory control, reader configuration, and tag reporting.

Always use the network port and protocol specified for your reader. The IP address identifies the device, while the application protocol determines how commands and tag data are exchanged.

How to Connect a Wireless RFID Reader to a Computer

Wireless RFID readers transfer data without a direct communication cable. Bluetooth is common on portable and handheld readers, while Wi-Fi is used on both handheld terminals and fixed RFID readers.

Connecting a Bluetooth RFID Reader

Bluetooth RFID readers can operate using different communication profiles. Some support keyboard emulation, while others use serial communication or Bluetooth Low Energy (BLE) services.

To connect a Bluetooth reader to a Windows computer:

  1. Turn on the RFID reader and enable its Bluetooth pairing mode.
  2. Open Settings > Bluetooth & devices on your computer.
  3. Enable Bluetooth and select Add device.
  4. Find the RFID reader in the available device list and complete the pairing process.
  5. Open the appropriate application for the reader’s Bluetooth communication mode.
  6. Scan a compatible RFID tag and verify that the data reaches your computer.

If the reader supports Bluetooth HID keyboard mode, scanned IDs can appear directly in applications such as Notepad or Excel.

Readers using Bluetooth Serial Port Profile (SPP) typically communicate through a virtual COM port. BLE-based models may require an application that supports the reader’s specific GATT services instead.

Pairing the devices establishes the Bluetooth connection, while the supported profile determines how the tag data is delivered.

Connecting a Wi-Fi RFID Reader

Wi-Fi RFID readers communicate through a wireless network, allowing computers to receive RFID data without a direct USB or Ethernet cable between the devices.

Follow these steps:

  1. Power on the RFID reader and open its wireless configuration interface.
  2. Select the Wi-Fi network and enter the network password.
  3. Confirm that the reader has connected and obtained a valid IP address.
  4. Make sure your computer can communicate with the reader over the network.
  5. Open the reader software and enter the reader’s IP address and communication settings.
  6. Start reading tags and check that the data is received.

The initial Wi-Fi configuration may be performed using a manufacturer utility, a web interface, or a temporary wired connection.

Naše 9 dBi Wireless UHF RFID Reader supports Wi-Fi connectivity alongside TCP/IP, RS-232, and RS-485 communication. It combines a fixed UHF reader and integrated antenna for applications such as warehouse identification and production automation.

For Android-based handheld RFID terminals, the workflow may be different. The handheld can scan tags through its own application and transfer records to a computer or central database using Wi-Fi, USB, or other supported methods.

How to Read RFID Tags on Your Computer

After establishing the connection, test whether the reader can detect a compatible RFID tag and send the expected information to your computer.

How the data appears depends on the reader’s output mode.

Direct data entry

For a USB HID or Bluetooth HID reader, open Excel or Notepad, select a text field, and scan a tag. The reader enters the configured tag data into the active field.

To collect multiple IDs in Excel, place the cursor in the first cell of a column and scan the tags one by one. If the reader is configured to send Enter after each scan, the cursor moves to the next row automatically.

RFID reader software

For serial, PC/SC, or network readers, open a compatible application, connect to the reader, and start scanning. The software may display tag identifiers, EPC values, antenna information, or other supported data fields.

For example, UHF inventory software often displays multiple detected EPCs during a single inventory operation. A livestock RFID application may display the identification number encoded in a 134.2 kHz animal tag.

Stored data transfer

Some handheld readers can save scan records internally. These records can later be downloaded to a computer using the supported connection and software.

Where the application supports exporting, the resulting data can be saved as CSV or Excel files for recordkeeping, inventory management, or further processing.

Why Is My RFID Reader Not Connecting to My Computer?

If your RFID reader is connected but not working, check whether the problem is with device recognition, communication, or tag reading.

ProblemPossible cause and solution
Computer does not recognize the RFID readerCheck the USB cable, port, power supply, and required driver. Try another USB port or cable.
No COM port appearsVerify that the reader uses serial communication. Install the correct USB serial driver if needed.
Reader connects but no tag data appearsCheck the software connection, reader mode, and whether scanning has been started.
Serial data appears as incorrect charactersCheck baud rate, parity, data bits, stop bits, and data encoding.
Ethernet reader cannot connectVerify the IP address, subnet, network connection, communication port, and firewall settings.
Bluetooth reader cannot pairCheck pairing mode, Bluetooth compatibility, and whether the reader is already connected to another device.
Reader connects but cannot read tagsVerify the RFID frequency and protocol, antenna connection, and reader settings.

For fixed UHF readers with external antennas, ensure that a suitable antenna is properly connected before enabling RF transmission. Also check the reader’s regional frequency configuration.

If the computer can communicate with the reader but no tag information is returned, use the manufacturer’s test software to check the reading function before troubleshooting the application integration.

Često postavljana pitanja

Can I Connect an RFID Reader Directly to Excel?

Yes. RFID readers supporting USB HID or Bluetooth HID keyboard emulation can enter tag IDs directly into Microsoft Excel.

Connect the reader, open a worksheet, select a cell, and scan a tag. The ID appears in the cell as keyboard input. Many readers can also be configured to send an Enter or Tab character after each scan.

Readers using serial, PC/SC, or network communication generally require compatible software or an application integration to transfer their data into Excel.

Does an RFID Reader Need a Driver or Special Software?

It depends on the reader’s communication mode.

USB HID readers generally use standard operating system drivers and can enter tag IDs directly into text fields.

USB Virtual COM readers may need a serial driver, while PC/SC readers use compatible smart card drivers and applications. Industrial readers commonly include configuration software or SDKs for communication and data collection.

Check the reader’s specifications to identify its required driver and software.

Can I Connect Multiple RFID Readers to One Computer?

Yes. A computer can communicate with multiple RFID readers as long as the hardware interfaces and software support the required connections.

For example, multiple USB HID readers can be connected to one computer, although their keystrokes normally go to the currently active input field. The receiving application may not be able to identify which keyboard-emulation reader supplied each scan.

Serial readers can use separate COM ports, while Ethernet readers can be addressed individually using their network settings.

For applications that need to distinguish between readers, dedicated RFID software can associate incoming tag data with a specific device or reading location.

Zaključak

Once the reader is connected, verify that your computer can receive a tag ID or EPC through the intended application. If the connection works but no data appears, check the reader’s output mode and software settings before changing the hardware.

For installations involving multiple readers, custom applications, or industrial equipment, the reader’s communication protocol and available SDK documentation are particularly important for reliable integration.

UPIT ODMAH

Ispunite obrazac u nastavku i javit ćemo vam se za 20 minuta.

UPIT ODMAH

Ispunite obrazac u nastavku i javit ćemo vam se za 20 minuta.

UPIT ODMAH

Ispunite obrazac u nastavku i javit ćemo vam se za 20 minuta.