NFC RFID Reader for ISO 14443A Cards and Tags

USB-HID NFC Reader Writer for MIFARE and NTAG

This NFC RFID reader operates at 13.56 MHz and supports reading and writing data on compatible ISO/IEC 14443 Type A cards and tags.

It supports common tag types including MIFARE S50, MIFARE S70, NTAG203 and NTAG213, making it suitable for desktop NFC tag management, card registration and data encoding applications.

The USB-HID interface provides a simple connection to compatible host systems, while LED indicators and a buzzer provide visual and audible feedback during operation.

NFC Read and Write Functions

Unlike a basic card-number reader, this device supports NFC data reading and writing for compatible ISO 14443A cards and tags.

This allows it to be used for applications where NFC tag information needs to be read, updated, or encoded rather than only capturing a card UID.

Communication speed is 106 Kbit/s, with a specified card reading speed of approximately 0.2 seconds.

Technical Specifications

ParameterSpecification
Operating Frequency13.56 MHz
ProtocolISO/IEC 14443 Type A
Supported Cards / TagsMIFARE S50, MIFARE S70, NTAG203, NTAG213 and other compatible ISO14443A tags
NFC FunctionsData reading and writing
Communication InterfaceUSB-HID
Communication Rate106 Kbit/s
Card Reading Speed0.2 s
Read Interval0.5 s
Input VoltageDC 5V ±10%
Working Current100 mA
Status IndicatorsRed power LED, green status LED and buzzer
Dimensions104 × 68 × 10 mm
Net Weight43.7 g
Package Size128 × 87 × 47 mm
Gross Weight98.5 g
Operating Temperature0°C to +50°C
Storage Temperature-20°C to +80°C
Operating Humidity5%–95% RH, non-condensing

Typical NFC Applications

  • NFC Tag Encoding
    For reading and writing compatible MIFARE and NTAG data during tag setup or configuration.
  • Card & Tag Data Management
    Suitable for desktop operations where NFC card or tag information needs to be checked, updated or managed.
  • Desktop NFC Registration
    Can be used at a workstation to register compatible NFC cards or tags into a software system.
  • Identification System Integration
    USB-HID connectivity allows the reader to be used as part of compatible access, identification or card-management workflows.

Setting Up an NFC Reading or Encoding Workflow?

Share your NFC chip type, required read/write operation and host-system requirements.
These details help confirm whether the reader supports the intended MIFARE or NTAG device and how it should be used in the application.

Frequently Asked Question

The top questions about NFC RFID reader

It supports compatible ISO/IEC 14443 Type A devices, including MIFARE S50, MIFARE S70, NTAG203 and NTAG213.

Yes. The product specification supports NFC data reading and writing for compatible cards and tags.

USB-HID is a USB Human Interface Device connection method. It allows the reader to communicate with compatible host systems through USB without requiring a specialized physical communication interface such as RS232.

Yes. NTAG213 is listed among the supported compatible tag types.

The specified communication rate is 106 Kbit/s.

The current specification confirms ISO/IEC 14443 Type A support. ISO14443B and ISO15693 are not listed, so compatibility with those protocols should not be assumed.

A basic card reader may only capture a card number or UID. This model supports reading and writing compatible NFC tag data, making it more suitable for tag encoding and NFC data-management applications.

InQUIRY NOW

Fill out the form below, and we will be in touch in 20 minutes.

InQUIRY NOW

Fill out the form below, and we will be in touch in 20 minutes.

InQUIRY NOW

Fill out the form below, and we will be in touch in 20 minutes.